Archive for the “Projects” Category

Some nice interior pictures of 180B

Read the rest of this entry »

Tags: ,

Comments No Comments »

On to the boot (trunk in some countries) I have never done a full job like this before i figured what the hell, what could possibly go wrong.
First up the Boot of FFJ, it did have it’s rubber mat in before i started (never took picture though)

Read the rest of this entry »

Tags: ,

Comments No Comments »


As in some pf the early posts i’m suing a S14 loom and as such i need to use a S14 ecu (23710-74F01) But with the added benefit of having it fully programmable.

Read the rest of this entry »

Tags: ,

Comments No Comments »

Next up was a task to modify the dizzy so that the 200SX (S14) ECU would be able to use its signal and fire the correct plug
Here are the pictures of the FJ Dizzy that i have converted so that i can use it as a CAS and put out signal to a S14 ecu

Read the rest of this entry »

Tags:

Comments 3 Comments »

EXHAUSTED, ok poor joke. The car was sent off to C&C custom stainless exhausts To have a Exhaust made from Turbo back and custom intake pipes. These guys do a first class job.

Read the rest of this entry »

Tags: ,

Comments No Comments »

On to the heart of the beast the engine. First up i needed to machine out the inlet manifold due to using a bigger throttle body from a 1998 Nissan Primera GT.

Next i had to make an adapter for the ACC and idle control valves

And Finally i sored out wiring for injectors to plug into the 200sx (S14) wiring loom.

The plenum and tubo wher then fitted to engine block ready for the custom pipe work. More on this soon.

Tags: ,

Comments No Comments »